ESD PCB magazine 6001.1 in polystyrene for boards up to 250 mm wide - cab 8917905

PCB magazine 6001.1 is the plainly built version for boards of 40 to 250 mm width and 342 mm length. Cover and base plate are fully closed except for the guide grooves, which keeps dust out and makes the magazine stiffer. The partition wall is set to the board width with four screw clamps, without spindles and without a drive.

Key benefits

• Width set by four screw clamps, a rugged design with no adjusting mechanism that could fail.
• Cover and base plate closed except for the guide grooves, dust and foreign bodies stay outside.
• ESD-safe according to the manufacturer, therefore usable in a protected area to IEC 61340-5-1.
• Board width 40 to 250 mm at 342 mm board length, sized for compact assemblies.
• Slots rated to 60 °C and ambient to 50 °C, suitable for boards straight out of the reflow oven.
• Net weight of 5.6 kg at outside dimensions of 320 x 563 x 355 mm.

Technical data

Applications

Buffering, storage and in-house transport of boards in placement, test and dispatch, where the magazine width rarely changes.

Compatibility and scope of delivery

For boards of 40 to 250 mm width and 342 mm length. The magazine is supplied partially assembled including transport lock B. Transport locks A and C are available as an option, the partition wall is polystyrene and the base plate is cast aluminium.

Standards and notes

ESD-safe according to the manufacturer, suitable for work areas to IEC 61340-5-1. Manufacturer details under GPSR: CAB Produkttechnik, Wilhelm-Schickard-Straße 14, DE-76131 Karlsruhe, www.cabgmbh.com.