Festo NPQM-LH-G38-Q10-P10 (558835) Push-In L-Fitting
€1,043.00
Excl. 19% VAT ,
excl. Shipping Cost
Article
FES-558835
Manufacturer Nr.
NPQM-LH-G38-Q10-P10
Push-In L-Fitting
Festo NPQM-LH-G38-Q10-P10 (558835) Push-In L-Fitting is available to buy in increments of 10
Frequently Bought Together
-
This Item:
€1,043.00Excl. 19% VAT , excl. Shipping Cost
-
Festo NPQM-D-Q6-S12-P10 (558770) Push-In Connector
€387.00Excl. 19% VAT , excl. Shipping Cost
-
Festo NPQM-D-S6-E-P10 (558812) Push-In Sleeve
€158.00Excl. 19% VAT , excl. Shipping Cost
Total price
| size | Standard |
| Nominal width [mm] | 8,5 |
| Seal type on stud | gasket |
| Construction set up | Push-pull principle |
| Operating pressure complete temperature range [bar] | -0,95 to 16 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] |
| Information about operating and control medium | Oiled operation possible |
| Corrosion resistant class KBK | 1 - low corrosion stress |
| ambient temperature [°C] | -20 to 70 |
| Nominal tightening torque [Nm] | 9,0 |
| Tolerance to nominal tightening torque | ± 20 % |
| Product weight [g] | 77,9 |
| Pneumatic connection 1 | G3/8 |
| Pneumatic connection 2 | For hose exterior diameter 10 mm |
| Material information | RoHs compliant |
| Housing material | Nickel-plated brass |
| Tube seal, hose seal material | NBR |
| Banjo bolt material | brass, nickel-plated |
| Manufacturer Nr. | NPQM-LH-G38-Q10-P10 |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568055677 |
| Weight | 0.080000 |
| HS-Code | 74122000 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Article authenticity | Original product |
| Condition of article | New |
Write Your Own Review
Customers Who Bought This Item Also Bought
Festo NPQM-LFK-G18-Q8-P10 (558839) Multiple Distributor
€1,015.00
Excl. 19% VAT ,
excl. Shipping Cost
