Electronics diagonal cutter with lead catcher, round head with bevel, 115 mm - Knipex 77 12 115

Cut wire ends fly off in an uncontrolled way and end up between the components. The 77 12 115 electronics diagonal cutter holds the offcut with its lead catcher. The round head with small bevel cuts soft wire from 0.3 to 1.6 mm dia. and the edges are laser hardened to approx. 62 HRC.

Benefits

• Durable, load-optimised design with a through-pinned, backlash-free box joint that gives a more direct feel when working.
• Slim sleeves drawn up towards the head allow fine and comfortable gripping between thumb and index finger.
• Less physical effort thanks to the high transmission ratio, plus a low-friction double spring for smooth and even opening.
• Round head with a small bevel and a lead catcher that holds the offcut, no uncontrolled loss of cut wire ends.
• Mirror polished head with a fine oil film protects against rust. No chrome flakes come loose that could cause faults in the circuit.

Areas of use

Board assembly and repair, precision mechanics, laboratory work and prototyping. The cutter severs component leads, cable ties and thin strands wherever access between components is tight.

Standards and conformity

The pliers comply with DIN ISO 9654. According to the manufacturer they contain no substances of very high concern under REACH. The RoHS directive does not apply to this product.