Electronic Super Knips precision cutter with wire clip, 125 mm - Knipex 78 41 125

When shortening component leads the offcut should not fly across the bench and the cut should stay clean. The 78 41 125 Electronic Super Knips has a wire clip for that and ground edges without bevel that cut soft wire from 0.2 to 1.6 mm dia. The edges are induction hardened to approx. 60 HRC.

Benefits

• The wire clip holds the cut wire, so offcuts do not spring away uncontrolled.
• Ground, very sharp edges without bevel, accurately shaped tips also cut wires lying flat from 0.2 mm dia.
• Shear cut with a controlled micro offset of the cutting edges for long service life and an ultra precise cut even on the thinnest wire.
• Extremely smooth action with opening spring and opening limiter for low-fatigue work throughout the shift.
• Joint with stainless steel rivet and a narrow head of 12.5 mm width, jaw length 9 mm.
• Special tool steel, black finished, cutting edges additionally induction hardened to approx. 60 HRC.

Technical data

Areas of use

Board assembly and rework, precision mechanics, model making, laboratory work and prototyping. It pays off wherever the thinnest wires have to be cut flush and the offcuts must not drop into the assembly.

Standards and conformity

The pliers comply with DIN ISO 9654. According to the manufacturer they contain no substances of very high concern under REACH. The RoHS directive does not apply to this product.