Electronic Super Knips precision side cutter for wire from Ø 0.2 mm, 125 mm - Knipex 78 81 125

On a populated circuit board a tenth of a millimetre decides whether a component lead is trimmed cleanly or a solder joint is damaged. The 78 81 125 Electronic Super Knips cut wires lying flat against a surface from Ø 0.2 mm with exactly shaped tips, and the tool weighs only 57 g.

Benefits

• Precision pliers for the finest cutting work, for example in electronics and precision mechanics.
• Exactly shaped tips cut wires close to a surface from Ø 0.2 mm, soft wire up to Ø 1.6 mm and hard wire up to Ø 0.6 mm.
• Shear cut with a controlled micro cutting edge offset for long service life and an ultra-precise cut even on the thinnest wire.
• Extremely smooth movement with opening spring and opening limiter for low-fatigue work in long runs.
• Precision-ground cutting edges with a very small bevel, additionally induction-hardened to about 62 HRC.
• Joint with a stainless steel rivet, pliers made of black oxide finished special tool steel.

Areas of use

Electronics manufacturing and repair, board assembly, precision mechanics, model making and laboratory work. The tool is at home wherever component leads have to be trimmed close to the board and fine strands cut without crushing them.

Standards and conformity

The pliers are made to DIN ISO 9654. According to the manufacturer they contain no substances of very high concern under REACH, and the RoHS directive does not apply.