Ankle High ESD Safety Shoe GX 305 Women S3, Waterproof Smooth Leather, Black Grey - Atlas 16200

Microfibre dries fast, leather lasts longer. The GX 305 is the leather version of the women's model from the ATLAS WOMEN series and the right choice where splash water, cleaning agents or sharp edged swarf attack the shoe. Protection class S3, steel toe cap with 200 joules and 15 kN to EN ISO 20345:2012.

What sets this shoe apart

• Dissipative to DIN EN 61340-5-1: the shoe drains the wearer's static charge through the sole instead of carrying it to the next component. This is the basic requirement for an EPA to work at all.
• The last comes from the ATLAS WOMEN series and is calculated for the proportions of a woman's foot, with a narrower heel and a lower instep. A scaled down men's shoe never sits right at exactly those two points.
• Steel toe cap to EN ISO 20345:2012, tested at a minimum of 200 joules impact energy and 15 kN compression. The cap is anatomically shaped and does not press on the toes.
• Puncture resistant without metal: the XP midsole made of aramid fabric stops nails and swarf, weighs less than a steel midsole and leaves the foot its natural torsion. Metal-free also means the shoe does not trigger metal detection.
• Full grain waterproof smooth leather about 2 mm thick, tight for hours, breathable and dimensionally stable. Where microfibre reaches its limit, for example with splash water and cleaning agents, this is the more durable choice.
• SPORTY sole system, developed for the female foot and laid out for soft cushioning. The outsole is slip resistant to SRC under EN ISO 20345, tested on ceramic with detergent and on steel with glycerine.
• The aktiv-X functional lining actively regulates moisture, does not stain and is abrasion resistant. After the shift the shoe dries through quickly.
• Approved for orthopaedic insoles per DGUV rule 112-191. Anyone who wears an insole does not have to fall back on a safety shoe without approval.

Technical data

Areas of use

• Electronics manufacturing and EPA areas to DIN EN 61340-5-1
• Assembly and inspection stations close to cleanrooms
• Light assembly and laboratory work
• Indoor warehouse and order picking

Standards and conformity

• EN ISO 20345:2012, protection class S3 with slip resistant outsole SRC. S3 means a closed heel area, antistatic properties, an energy absorbing heel, water repellent upper, a puncture resistant sole and a cleated outsole.
• DIN EN 61340-5-1 for the ESD workplace. The shoe is the dissipative link in the chain of person, shoe and floor.
• PPE Regulation (EU) 2016/425, risk category II.
• DGUV rule 112-191 for orthopaedic insoles.

Sizes

The article covers sizes 35 to 43, every size in the standard width 10. The required size is selected when ordering.