ESD safety shoe SL 9645 XP BOA S3S width 12, waterproof leather, black/royal blue - Atlas 62612

Wide feet need a wider last, not a longer shoe. The SL 9645 XP BOA is available in width 12 for exactly that, with unchanged protection and unchanged dissipation: the shoe keeps the through resistance of the person, shoe and floor chain below 100 MOhm measured to DIN EN 61340-5-1, the limit for an ESD protected area.

What sets this model apart

• Protection class S3S to EN ISO 20345:2022. It covers everything in S2, so a closed heel area, antistatic construction, energy absorbing heel and an upper tested for resistance to water penetration and water absorption, plus a cleated outsole and a non metallic penetration resistant insert tested with the 3.0 mm nail.
• alu-tec aluminium toe cap, tested to 200 joules of impact energy and 15 kN of compression, and lighter than a steel cap of the same protective effect.
• XP metal free penetration resistance with aramid fibres instead of a steel midsole. Full area protection against nails, flexible when the foot rolls off and without a cold bridge into the sole.
• BOA Fit System instead of laces. The dial spreads the tension evenly across the instep, can be operated with gloves and leaves no loose ends near machinery.
• MPU INNOFLEX System with MPU REBOUND SYSTEM. The sole guides the load along one continuous line from heel to toe and returns absorbed energy into the movement, while the aktiv-X functional lining regulates moisture inside the shoe.
• Supplied in width 12 (extra wide) and approved for orthopaedic insoles to DGUV 112-191, so prescribed insoles can be fitted.

Technical data

Areas of use

Assembly and final testing in electronics manufacturing, maintenance and plant service, storage and order picking inside an EPA, workshops with intermittently wet floors. The S3 specification also covers the walk across the yard and the loading ramp, so a second pair is not needed.

Standards and conformity

EN ISO 20345:2022 in the S3S SR configuration. In this edition SR denotes slip resistance as an additional requirement, tested on tile with glycerine. ESD performance follows DIN EN 61340-5-1 with a person, shoe and floor through resistance below 100 MOhm. Antistatic safety shoes sit between 100 kOhm and 1,000 MOhm under EN ISO 20345, and the lower limit of 100 kOhm secures limited protection against electric shock for work up to 230 V under DGUV 112-191. Personal protective equipment of category 2 under the PPE Regulation.

Sizes

The parent article covers EU sizes 36 bis 49. You pick the size through the variant, and every size is the same shoe with the same specification.