ESD safety low shoe CX 545 S3 SRC, cowhide, City Style, width 10 - Atlas 68900

Anyone moving between the production floor, the lab and a customer meeting does not want to change shoes on the way. The CX 545 from the City Style series looks like a street shoe and still meets class S3 SRC to EN ISO 20345, with a steel toe cap rated for 200 joules and penetration resistance. To DIN EN 61340-5-1 it is declared an ESD shoe with a resistance below 100 MOhm.

What the shoe does on the shop floor

• ESD shoe to DIN EN 61340-5-1. In the person-shoe-floor system the resistance stays below 100 MOhm, so the wearer's charge drains off in a controlled way instead of discharging into a component.
• Steel toe cap to EN ISO 20345, tested for 200 joules of impact energy and 15 kN of compression.
• Penetration-resistant insert in the midsole, a fixed part of class S3 to EN ISO 20345.
• Soft full-grain cowhide upper, breathable and dimensionally stable.
• MPU REBOUND SYSTEM in the sole. It absorbs impact energy at the heel and returns it into the roll-off, which is what counts across eight hours of standing and walking.
• aktiv-X functional lining, moisture regulating, abrasion resistant and colourfast. It dries quickly and keeps the foot dry across a full shift.

Technical data

Areas of use

Offices next to production and engineering offices, laboratory and test areas, field service work and walkthroughs of electronics production and EPA zones.

Standards and conformity

Class S3 to EN ISO 20345 covers a closed heel area, antistatic build, energy absorption in the heel, water-repellent upper, penetration resistance and a cleated outsole. SRC stands for slip resistance tested on ceramic with detergent and on steel with glycerine. For the ESD workplace, DIN EN 61340-5-1 is the governing standard. It measures the person-shoe-floor system, and the value has to stay below 100 MOhm. At the lower end the shoe standard caps the resistance at 0.1 MOhm so that the shoe still insulates during work up to 230 V. The antistatic range of the shoe standard itself runs from 0.1 MOhm to 1,000 MOhm.

The shoe is personal protective equipment of category II under PPE Regulation (EU) 2016/425. The model is approved for orthopaedic insoles to DGUV rule 112-191, the marking inside the shoe is what counts. The EU declaration of conformity is provided by the manufacturer ATLAS-Schuhfabrik in Dortmund.

Sizes

The article covers sizes 39 to 47, and each size can be ordered as its own variant. The sales unit is one pair.