ESD safety low shoe FLASH 6405 XP BOA S3S, dial closure, black - Atlas 91300

Gloves on, shoes closed, carry on. The FLASH 6405 XP BOA closes with a dial and a steel lace that pulls evenly across the instep instead of pressing at single points the way laces do. For the ESD workplace Atlas guarantees a person, shoe and floor resistance below 100 MOhm under the DIN EN 61340-5-1 measuring method, which is what the standard asks of footwear inside an EPA.

What sets this model apart

• BOA Fit System with a finely adjustable dial, a hard wearing lace and low friction guides. One turn closes it, one pull opens it, and the fit stays the same all day because no knot works loose.
• Class S3S to EN ISO 20345:2022: closed heel area, antistatic, energy absorbing heel, resistance to water penetration and absorption, cleated outsole and a non metallic penetration resistant insert tested with the thin 3.0 mm nail.
• Steel toe cap tested to the standard at 200 joules of impact energy and 15 kN of compression, plus an abrasion resistant MPU toe guard against wear from kneeling.
• SportLine upper of textile fibres, air permeable and light, combined with the clima-stream concept and the aktiv-X lining for moisture balance inside the shoe.
• MPU INNOFLEX System with MPU REBOUND SYSTEM: the CLOUDZONE cushions the heel, the DYNAMIC PLATES in the forefoot return energy to the push off. Made for long distances on hard industrial floors.
• Standard width 10, which Atlas builds broad and foot friendly, and also available in width 12 and in special widths 13 and 14. Released for insoles under DGUV rule 112-191.

Areas of use

Electronics manufacturing and test areas, assembly and maintenance, logistics and picking inside the EPA, service work with frequent changes of footwear. The dial pays off wherever shoes are opened several times a day.

Standards and conformity

• EN ISO 20345:2022, safety class S3S, slip resistance SR
• DIN EN 61340-5-1, person, shoe and floor resistance below 100 MOhm
• EN ISO 20345 requires an antistatic range between 10 to the power of 5 ohms (100 kOhm) and 10 to the power of 9 ohms (1000 MOhm)
• PPE regulation (EU) 2016/425, risk category 2
• DGUV rule 112-191, suitable for insoles

Sizes

Available in EU sizes 36 to 49. The sales unit is one pair. Besides standard width 10 the model is made in width 12 and in special widths 13 and 14.