Lead-Free Desoldering Braid on Spool, 0.6 mm to 2.54 mm Wide, 7.6 m Long - Desco

The right width for every joint: these Desco desoldering braids come in widths from 0.6 mm to 2.54 mm, from fine SMD pads to large lands. Every variant is made of clean, oxide-free copper wire in a tight weave and carries a flux formulated for the higher activation temperatures of lead-free solder. Choose width and length in the variant selector.

Key benefits

• Made for lead-free solder: flux activates at higher temperatures, type L0 per IPC J-STD-004B
• Economical: concentrated fine copper weave, 32 to 120 strands of 40 or 42 AWG depending on width
• Quick on and off thanks to oxide-free copper and a tight weave
• High SIR per Bellcore GR-78-CORE and IPC Test Method III, compatible with R, RA, RMA and NC fluxes
• Colour coded by width: gray, yellow, green, blue, brown for wire types A to E

Applications

Rework and repair of printed circuit boards, computers, mobile phones and other electronic assemblies in lines using RMA no-clean fluxes.

Standards

Flux to ANSI/J-STD-004 and IPC J-STD-004B type L0, surface insulation resistance per Bellcore GR-78-CORE (TR-TSY-000078) and IPC Test Method III. Every bobbin carries a lot code. Desco warrants the braid for two years from manufacture when stored in its original container.