ESD workstation leg Solo left, electric height adjustment 710-1210 mm, module depth 625 mm, crossbar 570 mm, 100 kg - Lista 90.800

For a height-adjustable ESD workstation with a shallow worktop, this left-hand Solo leg forms one side of the bench. With a 625 mm module depth and 570 mm crossbar depth, the motor adjusts the working height from 710 to 1210 mm, with a load capacity of 100 kg.

Benefits

• Electric height adjustment from 710 to 1210 mm: seated and standing work at the same station without conversion
• Load capacity 100 kg per leg for test set-ups, soldering stations and measuring equipment
• Crossbar depth 570 mm matched to the 625 mm module depth, same hole pattern as the Lista workbench leg
• Skids and levelling feet included to compensate for uneven floors
• Lista dissipative paint coating on all painted surfaces: charges are drained in a controlled way when the workstation system is earthed

Colours

This version is available in the following ESD colour, selected when you order:

• Anthracite grey RAL 7016

Use and combination

For height-adjustable workstations in EPA areas of electronics production, at test and repair stations and in the laboratory. A workbench is built from one left and one right Solo leg of the same module depth, completed with cross brace, worktop crossbars and an ESD worktop. Leg covers conceal the actuators, and finger guards are intended for workstations placed close together or flush.

A CPU holder and a keyboard drawer can be mounted under the worktop.

Notes

• Connection cable and control unit set are not included and must be ordered separately.
• Note left and right versions: this leg is the left-hand version.