ESD workstation leg Solo right, electric height adjustment 710-1210 mm, module depth 625 mm, crossbar 570 mm, 100 kg - Lista 90.801

This leg takes the right-hand side of a Solo workstation with 625 mm module depth. Its motor moves the worktop steplessly between 710 and 1210 mm, the crossbar is 570 mm deep and the leg takes up to 100 kg.

Benefits

• Electric height adjustment from 710 to 1210 mm: seated and standing work at the same station without conversion
• Load capacity 100 kg per leg for test set-ups, soldering stations and measuring equipment
• Crossbar depth 570 mm matched to the 625 mm module depth, same hole pattern as the Lista workbench leg
• Skids and levelling feet included to compensate for uneven floors
• Lista dissipative paint coating on all painted surfaces: charges are drained in a controlled way when the workstation system is earthed

Colours

This version is available in the following ESD colour, selected when you order:

• Anthracite grey RAL 7016

Use and combination

For height-adjustable workstations in EPA areas of electronics production, at test and repair stations and in the laboratory. A workbench is built from one left and one right Solo leg of the same module depth, completed with cross brace, worktop crossbars and an ESD worktop. Leg covers conceal the actuators, and finger guards are intended for workstations placed close together or flush.

A CPU holder and a keyboard drawer can be mounted under the worktop.

Notes

• Connection cable and control unit set are not included and must be ordered separately.
• Note left and right versions: this leg is the right-hand version.