ESD Spray Coating AstraStat Type B 2K PU 5.6 kg Set, RAL 9002 grey white - Statech Systems
-
This Item:
€749.00
-
ESD Spray Coating AstraStat Type B 2K PU 5.6 kg Set, RAL 1015 light ivory - Statech Systems
€749.00
-
ESD Adhesion Primer HP-S for AstraStat Type S, 1K, 400 ml - Statech Systems
€44.30
An aerosol is not enough when a whole installation has to become dissipative. AstraStat type B is rolled or sprayed and coats laboratory benches, steel cabinets, trolleys and GRP parts in one pass. The set of 4.8 kg base paint and 0.8 kg hardener covers roughly 67 m² at 30 micron dry film thickness.
Benefits
- Surface resistance below 3.5 x 10⁷ ohm to IEC 61340-2-3, permanent and independent of humidity and temperature
- Cleanroom suitable to class ISO 5, which also covers assembly lines in electronics manufacturing
- High abrasion resistance and good chemical resistance, weatherproof outdoors as well
- Adheres to difficult substrates such as GRP, laminate and coated metal
- Single-layer and top coat in one, no separate build-up needed
Technical data
- Type: 2K PUR ESD conductive paint, matt, polyisocyanate-crosslinking acrylic resin
- Shade: RAL 9002 grey white
- Supply form: 4.8 kg base paint and 0.8 kg hardener 4S-AS-HRT
- Mixing ratio: 6:1 by weight
- Surface resistance: below 3.5 x 10⁷ ohm (IEC 61340-2-3)
- Coverage: 81 g/m², around 12 m² per kg at 30 micron dry film
- Pot life: approx. 5 hours at 23 °C
- Drying at 20 °C: dust dry after 30 minutes, touch dry after 4 hours
- Supply viscosity: 200 to 250 mPas, mixed density 1.3 g/cm³
- Solids content: 69 percent base paint, 70 percent mixed
- Application from +10 °C, shelf life 6 months at 23 °C
Applications
Electronics manufacturing and assembly, chemical plants, pyrotechnics and explosion-protected areas. Typical objects are laboratory benches, chairs, trolleys, steel cabinets, plastic panels and containers. Grey white is the neutral shade for walls, panelling and large fitted surfaces.
How to apply
- Stir the base paint and mix it with the hardener about a quarter of an hour before use
- Roller: up to 8 percent thinner 4S-VA or at supply viscosity
- Spray: approx. 20 percent thinner 4S-VA, spray viscosity 30 seconds DIN-4
- Clean equipment immediately after use with 4S-VA thinner
Standards and notes
Measuring method to IEC 61340-2-3, use inside an EPA to IEC 61340-5-1. Slight deviations from the RAL shade come from the conductive pigments. Transparent, white, luminous and signal colours cannot be produced. See the safety data sheet for safety information.
| Weight | 9.000000 |
|---|---|
| Manufacturer | Statech Systems |
| Manufacturer Nr. | 4S-AS-ESD-B |
| HS-Code | 32082090 |
| GPSR manufacturer information | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | Switzerland |
| Sales unit | Set 5,6 kg (4,8 kg Stammlack + 0,8 kg Härter) |
| Colour | White |
| Farbe | RAL 9002 grauweiß |
| ESD version | ESD (antistatic) |
| ESD equipment | ESD-Lacke |
| ESD-Eigenschaft | dissipative |
| Certification | DIN EN 61340-2-3, IEC 61340-5-1 |
