ESD support column 1400 mm, profile 30x60 mm, for mounting on workbench tops, right position - Lista 93.398

As the right-hand post of a tall workbench superstructure, this ESD support column offers 1400 mm of usable height. Together with the right support bracket it stays stable even when every level is loaded to full capacity.

Benefits

• Dissipative surface: The painted surfaces carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• Hang without screws: the steel profile is perforated on four sides in a 50 mm pitch, so add-on parts hang in and move largely without tools.
• 100 kg capacity: on beech or multiplex tops, 50 kg on Universal, Eterlux, resin and ABS tops.
• Supplied complete: fixing material for screwing onto the top is included.

Colours

Choose the ESD colour when ordering from the following options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The column belongs to Lista's universal superstructures and carries adjustable shelves, swivel shelves and other add-on parts above ESD workbenches in electronics production, at test and repair stations and in the lab. It is only suitable for workbench tops made of beech, multiplex, Universal, Eterlux, resin and ABS with a thickness of at least 40 mm. The dissipative effect depends on the setup being properly earthed.

Notes

When the full load capacity is used, a support bracket is mandatory (right support bracket). The outer support columns protrude 15 mm beyond the top as standard. For a flush finish, tops with 30 mm extra length are available, for example 1530 or 2030 mm. For mounting on a 28 or 30 mm worktop of an electrically height-adjustable table (Lista Quattro, Duo, Solo), a counter holder or counter plate is required. Observe Lista's planning note on support column load capacity.