ESD support column 700 mm, profile 30x60 mm, for mounting on workbench tops, centre position - Lista 93.393

If you plan a superstructure with two bays over a long workbench, you need a centre post that carries both. This ESD support column provides 700 mm of usable height above the top and is screwed onto the middle of the workbench top, with fixing material included.

Benefits

• Dissipative surface: The painted surfaces carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• Hang without screws: the steel profile is perforated on four sides in a 50 mm pitch, so add-on parts hang in and move largely without tools.
• 100 kg capacity: on beech or multiplex tops, 50 kg on Universal, Eterlux, resin and ABS tops.
• Supplied complete: fixing material for screwing onto the top is included.

Colours

Choose the ESD colour when ordering from the following options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The column belongs to Lista's universal superstructures and carries adjustable shelves, swivel shelves and other add-on parts above ESD workbenches in electronics production, at test and repair stations and in the lab. It is only suitable for workbench tops made of beech, multiplex, Universal, Eterlux, resin and ABS with a thickness of at least 40 mm. The dissipative effect depends on the setup being properly earthed.

Notes

For mounting on a 28 or 30 mm worktop of an electrically height-adjustable table (Lista Quattro, Duo, Solo), a counter holder or counter plate is required. Observe Lista's planning note on support column load capacity.