ESD Survey Kit in carrying case with instruments for EPA audits to IEC 61340-5-1 - Iteco 9265151

Anyone auditing an ESD control programme to IEC 61340-5-1 needs several instruments on the same walk-through. The Iteco ESD Survey Kit keeps them together in one padded case, led by the GigaLab EVO multi-voltage megohmmeter that reads from 1 kΩ up to 1 TΩ at four test voltages between 10 and 500 V.

Benefits in daily testing

• Four test voltages from 10 to 500 V cover bench mats, flooring, chairs and packaging with a single meter.
• The shielded measuring system of the GigaLab EVO suppresses the usual noise and keeps readings up to 1 TΩ repeatable.
• Internal memory holds 100 measurements with resistance value, test voltage, humidity and temperature, so the walk-through is documented without a paper list.
• The Walking Test EVO included in the case verifies personnel grounding through footwear and floor right where the work happens.
• Two probes of 2.3 kg each, a 63 mm shielded probe and a 63/30 mm concentric ring probe, allow point-to-point and surface measurement without extra weights.
• The foam insert is cut to the instruments, so nothing shifts when the case travels between sites.

Typical configuration

Applications

• Periodic verification of the EPA according to your own ESD control plan
• Incoming inspection of packaging, bench mats and floor material
• Acceptance of newly equipped workstations and rebuilt lines
• Internal audits and customer audits with on-site measurement evidence
• Testing across several sites, because the kit is fully portable

Compatibility and scope of supply

Supplied as a case with cut foam insert and the configuration listed above. The selection is not fixed, individual items can be swapped or added, for example the GigaLab EVO Plus with serial data interface or a FieldLab EVO field meter for checking ionisers. Each instrument comes with a traceable calibration report, and later recalibration is available as a separate order item.

Standards and origin

The measuring procedures of the kit follow IEC 61340-5-1. Manufactured by Iteco Trading in Italy.