FieldLab EVO field meter up to 20 kV with ion balance mode and 9 V battery - Iteco 9265700
-
This Item:
€793.80
-
Ioniser verification system with Charger EVO, field meter not included - Iteco 9265505
€1,345.03
-
Clamp electrodes for textiles to IEC 61340-4-9 (2 pieces)
€209.30
An ioniser whose ion balance has drifted charges assemblies instead of neutralising them. The FieldLab EVO makes that state visible. With the ion balance mode and the insulated metal plate supplied, the residual charge in the air stream is measured with a resolution of 1 V in the range up to 200 V.
Benefits when checking ionisers
- Ion balance mode with the insulated metal plate included, so no extra fixture is needed for the test
- Finest range with 1 V resolution up to 200 V, the range in which a deviation of the ion balance can be read at all
- Two LED beams converge exactly at the specified measuring distance of 25.4 mm, keeping readings comparable between operators
- Magnitude and polarity are displayed, so a positive residual charge is told apart from a negative one at once
- Battery operation with a 9 V block, the meter travels to the equipment and needs no mains outlet
- A traceable ISO9000 calibration report is supplied, providing the evidence for the test equipment register
Technical data
| Feature | Value |
|---|---|
| Coarse range | ±20 kV, resolution 100 V |
| Medium range | ±1.5 kV, resolution 10 V |
| Fine range | ±200 V, resolution 1 V |
| Accuracy | ±10 % |
| Reference distance | 25.4 mm, equal to 1 inch |
| Distance aid | two LED beams converging at the correct distance |
| Special mode | ion balance with insulated metal plate |
| Displayed values | field strength and polarity |
| Power supply | 9 V battery, included |
| Calibration | traceable ISO9000 report included |
Applications
- Recurring checks of ionising blowers and ionizing guns within the maintenance plan
- Acceptance after cleaning or replacing the emitter points of an ioniser
- Tracing charge sources on packaging material, films and fixtures
- Checking insulating items at the bench before sensitive assemblies are handled
- Evidence during internal audits where ionization is used as a control measure
Compatibility and scope of supply
Supplied with the meter, the insulated metal plate for ion balance mode, the 9 V battery and the calibration report. Together with the Charger EVO, which charges insulated plates to between 100 and 1100 V, the discharge time of an ioniser can also be determined. The ioniser verification system 9265.505 is intended for exactly this combination without an additional field meter. If higher accuracy of ±5 % and an analogue output for a recorder are required, the FIELDLAB version 9265.501 is the alternative.
Origin
Manufactured by Iteco Trading in Italy.
| Norm | DIN EN ISO 9000 |
|---|---|
| Certification | IEC 61340-5-1 |
| ESD version | ESD (antistatic) |
| Manufacturer Nr. | 9265700 |
| Manufacturer | Iteco |
| Country of Manufacture | Italy |
| Weight | 1.000000 |
| Sales unit | Stück |
| GPSR manufacturer information | Iteco Trading S.r.l, Via Paisas 1, IT-10094 Giaveno (TO), www.iteco.it |
| Series | FieldLab EVO |
| Operating voltage | 9 V |
