Lötspitze verjüngter Schaft, meißelförmig mit Kerbe 2,0 x 2,0 mm für Lötroboter-Tools 9018M, 9018BMT - Quick QU911G-20DV1-04

Leads tied into ground planes and wide copper drain heat faster than a thin edge can replace it. The QU911G-20DV1-04 answers with a square 2.0 x 2.0 mm section, the material behind the edge works as a heat reservoir, and the notch keeps the fed solder wire exactly where it belongs.

What the geometry delivers

• Section of 2.0 x 2.0 mm, clearly more mass behind the contact face than on the 0.8 mm standard edge of the same width.
• Notch in the edge, the fed wire does not slip off and the alloy flows at the intended spot.
• Tapered shank, so the heavy edge still reaches joints located between taller components.
• Straight design, matched to the fixed axis position in the robot and a repeatable approach dimension.
• RoHS compliant and suited to lead free alloys with their higher temperature demand.

Application and compatibility

Intended for the 9018M and 9018BMT robot soldering tools, that is for the QUICK ET9181 SEMI-AUTO with wire feeder, the 9594FYA and 9584EYA with two tables, the ET9494E and ET9494F-A and further models of the range. Where the joint needs less heat and the space is tighter, the notched QU911G-16DV1-05 at 1.6 x 0.8 mm is the better fit. Scope of delivery: one soldering tip.