Kartuschen-Lötspitze TS1, bleistiftspitz 0,5 mm (SS1-B) - Quick SS1-B

On a finished board what matters is not how much heat there is but where it goes. This SS1 tip guides the heat through a 0.5 mm cone onto a single pad, leaving the joint next door cold so one component can be swapped without disturbing its surroundings.

Features

• Tip diameter of 0.5 mm, heat is applied as a point on the pad or lead rather than across the area beside it.
• Straight version, the cone follows the axis of the iron and can be placed precisely with a steady hand.
• Slim shape for tight component spacing, where a chisel edge would already be touching the neighbour.
• Cartridge design with heater and sensor close behind the tip, so temperature recovers quickly despite the small contact area.
• RoHS compliant according to the manufacturer.

Application, scope of delivery and compatibility

For repair and rework on populated boards, for single resistors and capacitors and for wire links, on the QUICK TS1 cordless iron rated 10 W over 100 to 420 °C. Scope of delivery, one soldering tip. For even smaller packages the SS1 series offers the 0.2 mm SS1-I, and for joints with a high heat demand the chisel shapes.