Kartuschenlötspitze für TS8, gerade, angeschrägt mit Hohlkehle 60°, Ø 3 mm, Stirn Lot-benetzt - Quick TSS08-3CM02

Between tall electrolytics or shielding cans there is no room for a flatly held iron. The TSS08-3CM02 answers that with a 60 degree grind on a 3 mm diameter, while the concave face still holds the solder, so a steeper approach and a solder reservoir come together.

Operating benefits

• 60 degree grind, the iron stands more upright and reaches joints between tall neighbours.
• Hollow in the face, the solder stays in the cavity and can be metered out.
• Solid 3 mm body, enough thermal storage for pads tied into copper areas.
• Face pre-tinned from the factory, so the working surface is wetted from the first use.
• Thermocouple inside the tip unit, the station corrects as soon as the joint draws heat.
• Calibration chip stored in the cartridge, the temperature reading stays valid after a change of geometry.

Application, scope of delivery and compatibility

Meant for densely populated assemblies, for rework between heat sinks and shields, and for terminals approached from above. Scope of delivery, one cartridge soldering tip. It runs in the QUELKTSS80A handpiece on Quick TS8 and TS8+. For a flatter approach take the same 3 mm shape with a 45 degree grind, both belong to the TSS08R series and interchange with each other.