Z-Line filter cassette G4 prefilter for Jumbo and series 150/160/MED - ULT 02.1.230

The Z-Line filter cassette G4 (02.1.230) is the first filter stage for ULT ASD-series filter trolleys and for the Jumbo and series 150/160/MED units. The zig-zag Z-Line pleat packs a large filter area into a compact space and therefore offers plenty of holding volume for coarse dust before it reaches the downstream particulate and adsorption filters.

Benefits

• Filter class G4, rated by ULT as ISO Coarse 90 % to ISO 16890, for reliable coarse dust separation
• Z-Line pleating with a large filter area and a correspondingly long service life
• In the dust and fume setup it protects the M5 filter mat at ISO Coarse 85 % and the H13 particulate cassette, which reaches a separation rate of 99.95 % to DIN EN 1822
• In the medical setup it protects the U15A combination cassette, whose ULPA stage separates well above 99.9995 %
• Low-cost wear part, which reduces filter cost per operating hour

Handling at filter change

In the dust and fume filter setup of the series the Z-Line filter is integrated into a disposal carton. The carton is closed on the raw gas side and the raw gas enters through a lip seal. The loaded filter stays inside the carton during the change, which keeps dust release low.

Applications

Coarse dust prefiltration during grinding, engraving, polishing, filling and dosing operations and restoration work, plus pre-separation ahead of the adsorption stage in units for odours, gases and vapours.

Compatibility and scope of delivery

Suitable for ULT ASD filter trolley, Jumbo and series 150/160/MED. Supplied as one piece. As a wear part it should be replaced regularly depending on load.

Manufactured by ULT AG, Germany.