ESD connection cable, 6-pin, 3.0 m, with plug for the DLV-7530 electric screwdrivers - Delvo TD02488

The distance between the bench and the control unit is rarely less than two metres. This connection cable brings 3.0 m and takes the DLV-7530 electric screwdriver to the control unit in a dissipative design, without any extension.

Benefits

• 3.0 m of length cover the run from the hand piece to the control unit, even when it stands below the bench top or on a shelf
• 6-pin plug matching the connector of the DLV-7530 series
• Dissipative design, so the cable suits the ESD bench alongside the DLV-7530-BKE screwdriver
• Made for the DLV-7530 rated 0.5 to 1.7 Nm at 1100 rpm, which is supplied without a control unit
• Original Nitto Kohki part with a defined pin assignment instead of a self-made lead

Applications

ESD workplaces in electronics manufacturing, final assembly and maintenance running the DLV-7530 at 0.5 to 1.7 Nm and 1100 rpm.

Matching accessories

• DLW-9100 plug as the connecting part of the same series
• Protective caps DLW-5600 and DLW-5700 for the DLV75 to DLV86 series
• TD01838 connection cable for the larger DLV-7550-MKE

ESD design

The cable is of dissipative design, so no disturbing charge builds up on the lead. It can therefore be used in an EPA to IEC 61340-5-1 together with the dissipative screwdrivers of the DLV-7530 series.