Ring magnet for screwdriver bits, 4.7 mm inner dia., 3 movable magnets - Delvo MAG-RING-4,7

A screw that drops off the bit while you position it costs time every single time, and in the worst case it ends up inside the unit. Pushed onto the screwdriver bit, this ring magnet holds the screw until the thread bites. The 4.70 mm inner diameter is the size 4.7 from the model name and decides which bit the ring fits.

Benefits

• Holds the screw on the bit, so it can be presented vertically and overhead as well
• Three movable magnets inside the ring instead of one rigid magnet body
• 4.70 mm inner diameter, the smallest of the three sizes in this range, the others being 4.7 mm, 6.0 mm and 7.0 mm
• 15.10 mm outer diameter at a height of 10.30 mm, the ring stays short and does not hide the screw position
• Simply pushed on, so existing screwdriver bits can be retrofitted with it

Applications

Assembly with electric screwdrivers in electronics manufacturing, instrument building and final assembly, wherever the screw has to sit safely on the bit before it is driven. Also in repair and service work on assemblies with deep or awkward screw positions.

Matching accessories

• Screwdriver bits from the Delvo DLB range such as DLB 2122, DLB 2123 and DLB 2124
• Torx Plus bit DLB-2906IP-64
• The same ring magnet in sizes MAG-RING-6,0 und MAG-RING-7,0, pick the size to match the bit the ring is fitted on