Control unit for ESD electric screwdrivers of the DLV-7300 series, soft start, 6-pole - Delvo DLC-1213A-GGB

A Delvo electric screwdriver of the DLV-7300 series does not run without a control unit. This power supply and control unit turns 230 V AC into the 24 V the tool needs and adds soft start and the preset speed through the 6-pole socket.

Benefits

• One unit for the complete ESD range DLV-7300, from the DLV7319-BME up to the DLV7349-BME.
• Soft start brings the spindle up gently, so the bit stays seated in the recess and the thread is not shaved.
• Speed adjustable on the unit, so the same screwdriver handles small plastic screws and metal threads.
• 230 V AC, 50/60 Hz input with Europe plug, a standard bench socket is all it takes.
• 2.3 kg mass keeps the housing in place under or beside the bench while work goes on.
• ESD design, matched to the ESD screwdrivers of the same series.

Applications

Electronics manufacturing, device and assembly work, test and repair benches inside an EPA, wherever a Delvo screwdriver of the DLV-7300 series is operated at a fixed workplace.

Matching accessories

Screwdrivers driven by this unit include the DLV-7321-BKE6, DLV-7331-BKE, DLV-7335-BKE and DLV-7331-BME6 as well as the fine models DLV-7410-BME6 and DLV-7420A BME6. The DLW-9072 connecting cable links tool and unit.

ESD design

The control unit is built in ESD design and conducts charges away in a controlled way instead of letting them build up on the housing. It therefore suits workplaces set up as an EPA according to IEC 61340-5-1.