Torx Plus screwdriver bit, half round 4 mm shank, 64 mm overall length - Delvo DLB-2906IP-64

At a manual bench with an electric screwdriver, the bit decides how far the hand stays away from the workpiece. This Torx Plus bit measures 64 mm and sits in the H4 holder directly on its half round 4 mm shank, with no intermediate piece and no added play.

Benefits

• 4 mm dia. shank in half round HR form, matching the series DLV7400A, DLV5700, DLV5800, DLV7300 in the BME version, DLV7000, DLV8000 and DLV3300
• 64 mm overall length instead of the short 44 mm version, so recessed joints are reached without an extension
• Torx Plus uses steeper drive flanks than the plain hexalobular profile and transfers torque into the screw head with less radial force
• Special alloy that Nitto Kohki prepares for screwdriver bits only, with controlled heat treatment and close hardness testing
• In-house production from raw material to finished bit, which keeps the run-out of the bit axis small
• Usable on screwdrivers with a 1/4 inch holder through the ADA-HR4-D63 adapter

Applications

Electronics and equipment assembly, final assembly of housings with Torx Plus fasteners, inspection, rework and service benches where the screw sits deep or behind a rim.

Matching accessories

• Electric screwdrivers with a 4 mm holder such as DLV-7410-BME6, DLV-7420A BME6 or DLV-7331-BME6
• Bit adapter ADA-HR4-D63 for screwdrivers with a 1/4 inch holder
• Ring magnets MAG-RING-4,7 and MAG-RING-6,0 to keep the screw on the bit
• DLB-2806IP-64 as a further Torx Plus version of the same length