Phillips screwdriver bit size No. 0, 44 mm overall length, 4 mm half round shank - Delvo DLB2124

Phillips No. 0 is the size that runs most often in electronics assembly, and that is exactly where a worn bit shows up immediately as scrap. This NK4D bit is 44 mm long, has an 11 mm blade length and comes in hardness grade H, which Nitto Kohki assigns to screw sizes from 1 to 3 mm.

Benefits

• Hardness grade H, the hardest grade of the series, intended for screw sizes from 1 to 3 mm
• Short 44 mm build, no wind up between the bit holder and the screw head
• 11 mm blade length for full engagement in the No. 0 cross recess
• Half round 4 mm shank with a collar at 20 mm for a defined insertion depth
• 3.5 mm shank diameter at the transition to the blade, a slim contour for tight screw patterns
• Special alloy that Nitto Kohki prepares solely for screwdriver bits, with a narrow hardness check

Applications

• Volume assembly of circuit boards, connectors and housing covers
• Precision engineering and instrument building with repeating small screw joints
• Service and rework where the cross recess has to stay intact

Matching accessories

• Electric screwdrivers with a 4 mm holder such as DLV-7410-BME6, DLV-7420A BME6 and DLV-7331-BME6
• Adapter ADA-HR4-D63 for screwdrivers with a 1/4 inch holder
• Ring magnets MAG-RING-4,7 and MAG-RING-6,0
• Same size in 64 mm length as DLB2125, one size smaller as DLB2122