Bag filter F9 HFM TH filter system series 300 - ULT 02.1.480

For the same installation space, a bag filter offers several times the filter area of a flat mat. That is exactly what the F9 brings to the HFM TH filter system of the ULT 300 series: plenty of dust storage, moderate pressure drop and correspondingly long intervals.

Benefits

• Filter class F9, sized for the fine dust fraction in solder and process exhaust air
• Pocket design with a large filter area inside the compact 300 series filter shaft
• High dust holding capacity, giving longer change intervals than a flat mat
• Relieves the downstream H13 particulate filter and lowers filter cost per operating hour
• Fits every bag filter unit of the 300 series rated 200 to 250 m³/h

Technical data

Applications

Filter replacement on continuously running 300 series extraction units, for example on soldering lines, at laser marking stations and in dusty rework. The change is due when pressure drop rises or volume flow at the capture point falls off.

Compatibility and scope of delivery

For the ULT bag filter units ASD 300 MD.14 TH, ASD 300 MD.16 TH and ASD 300 HD.13 TH as well as LAS 300 MD.14 THA9, LAS 300 MD.16 THA9 and LAS 300 HD.13 THA9. One F9 bag filter is supplied. The upstream M5 filter mat (ULT 4-00268) and the H13 particulate filter (ULT 4-00067) are ordered separately, and on the LAS 300 THA9 the A9 adsorption filter cassette (ULT 4-00381) follows as the last stage.