Precision tweezers for fine mechanics, straight, 0.2 mm needle tips, stainless steel, 125 mm - Knipex 92 22 07

In watchmaking, prototype work and on the test bench every tenth of a millimetre counts. The 92 22 07 precision tweezers for fine mechanics grip with a needle-pointed shape only 0.2 mm wide and stay easy to guide thanks to their straight 125 mm design.

Benefits

• Needle-pointed design with tip widths of 0.2 mm and 0.25 mm for small parts in the tenth of a millimetre range.
• Straight design for direct access into magazines, trays and assemblies.
• High-quality stainless steel with high toughness, very good acid resistance and confirmed corrosion resistance against many corrosive materials.
• Antimagnetic (80%), so small parts stay free to move at the tip.
• Smooth gripping surfaces and smooth handles, matt finish against reflections under a magnifying lamp.
• A light tool at 15 g for low-fatigue work over long shifts.

Technical data

Areas of use

Electronics industry, watchmakers and jewellers, plus laboratory, prototype building and quality inspection. For work inside an EPA to IEC 61340-5-1 an ESD-tested version should be chosen, this model is conductive but not ESD-tested.

Standards and conformity

The manufacturer does not state a standard for this tool. There is neither an ESD test nor a VDE test. According to the manufacturer the tweezers contain no substances of very high concern under REACH and the RoHS directive does not apply.