Inlet nozzle for SFR-B solder wire feeder, wire Ø 0.7 mm, ESD safe - JBC 0030536

Solder wire of 0.7 mm is fine enough to buckle at the feeder inlet as soon as there is play. This JBC inlet nozzle is bored to exactly 0.7 mm and guides the wire on axis into the feed mechanism of the SFR-B automatic solder wire feeder.

Benefits in use

• Bore matched to solder wire of Ø 0.7 mm, so the wire enters the feed mechanism without lateral play.
• Inlet side wear part of the SFR-B automatic solder wire feeder, one dedicated nozzle per wire size in use.
• ESD safe design, intended for workstations inside an EPA.
• Genuine JBC part under model number 0030536, fit and bore match the as delivered condition.
• Sales unit of 1 piece, demand can be planned per wire diameter and machine.

Technical data

Applications

Automated soldering cells and robot soldering systems in which the SFR-B feeds the wire in step with the process. Typical fields are printed circuit board production, test areas and series soldering where the wire size changes from job to job.

Compatibility and scope of delivery

Intended for the JBC SFR-B automatic solder wire feeder running solder wire of Ø 0.7 mm. One inlet nozzle is supplied. Solder wire, guide kit and further wear parts are not included.

ESD and conformity

The part is ESD safe according to the manufacturer and is intended for use inside an electrostatic protected area. The manufacturer is JBC Soldering SL.