ESD Extraction arm DN50 for wall and ceiling mounting, aluminium, black - Alsident 50-47-3-6

The extraction arm captures solder fumes, vapours and dust right at the source, before they reach the breathing zone. With a 50 mm tube diameter and a recommended air volume of 45 to 85 m³/h it is built for wall and ceiling mounting.

As an ESD version, the arm discharges static via the supplied earthing cable with a 1 MΩ safety resistor and can be used inside EPAs.

Benefits in use

• Tubes in chromated TCP aluminium for permanent conductivity, joints in impact-resistant, conductive polypropylene
• Maintenance-free conductive O-rings in the joints
• Integrated throttle damper that swings fully out of the airflow when open, giving maximum flow
• Threaded rods, springs and finger screws in acid-resistant AISI 316L stainless steel
• Acid-resistant blind rivets for long service life even in aggressive atmospheres
• Tool-free disassembly for cleaning

Applications

Soldering stations in electronics production and repair, laboratories, bonding and potting stations, and workplaces with solvent vapours. The arm connects to an extraction unit or a central extraction system.

Standards and compliance

Tested for use in ESD areas to IEC 61340-5-1:2016. RoHS compliant.