Precision soldering and desoldering station for 2 tools, 150 W per channel, with T210 and AM120 - JBC DDPE-2QD

Fine work on small SMD parts rarely fails on skill, it fails on heat recovery at the moment of contact. The DDPE-2QD delivers up to 150 W per tool and keeps idle tip temperature stable within ±1.5 °C, so the selected 90 to 450 °C actually reach the joint under load.

Benefits in use

• Two tools run at the same time on one control unit, each with up to 150 W peak power at 200 W rated power.
• The cartridge type decides compatibility. The T210 handle works only with the C210 range, the AM120 tweezers only with the C120 range.
• Temperature accuracy of ±3 % against a reference cartridge, plus ±50 °C fine adjustment in the station menu.
• Voltage and resistance between tip and ground meet ANSI/ESD S20.20 and IPC J-STD-001F, so the station belongs inside the EPA.
• USB-A takes firmware, graphics and profiles and feeds a Dino-Lite USB microscope of models AM2011 and AM2111, USB-B connects to the PC.
• RJ12 connects fume extraction, peripherals or a robot cell, a foot pedal controls the tool hands free.

Applications

Rework on SMD parts and small package ICs, repair of populated assemblies, laboratory and prototype work, and service benches where soldering and desoldering happen at the same seat.

Compatibility and scope of delivery

• DDE control unit for two tools, compatible with 13 JBC tools
• T210 precision handle for cartridges of the C210 range
• Adjustable AM120 micro tweezers for cartridges of the C120 range
• Cartridges are wear parts and are ordered separately

Standards and compliance

ESD-safe to ANSI/ESD S20.20, temperature stability meets and exceeds IPC J-STD-001F. The station complies with CE requirements. Operating voltage 230 V, permitted ambient temperature 10 to 40 °C.