ESD rework station for 4 tools with T210, T245, AM120, DT530 and MSE module - JBC DMPSD-2QB

Four tools live at the same time with no replugging. The DME control unit feeds the T210 precision handle, the T245 general purpose handle, the adjustable AM120 micro tweezers and the angled DT530 desoldering iron with up to 150 W peak power each. One bench then covers fine SMD work, ground planes and through hole desoldering.

Key benefits

• The cartridge type decides compatibility. T210 takes the C210 range, T245 the C245 range, and the DT530 works with desoldering tips of the D530 range.
• Four channels on the DME control unit, compatible with 13 different JBC tools.
• 150 W peak power per tool at 200 W rated power, working range 90 to 450 °C at ± 3 % accuracy.
• The adjustable AM120 micro tweezers grip small parts from both sides and complement the two soldering handles.
• The MSE module draws with 42 W, 85 % vacuum and 35 SLPM flow, controlled by pedal if wanted.
• USB-A takes firmware, graphics and profiles and connects a Dino-Lite USB microscope of models AM2011 and AM2111, USB-B goes to the PC and RJ12 drives extraction, peripherals or robots.

Applications

Rework benches in electronics production, development and prototype work with changing component sizes, repair of controllers and power electronics.

Compatibility and scope of delivery

The delivery covers the DME control unit for four tools, the T210 precision handle, the T245 general purpose handle, the adjustable AM120 micro tweezers, the angled DT530 desoldering iron and the electric MSE desoldering module. Wear parts of the DT530 such as solder collector and filters are available separately.

Standards and compliance

The station complies with CE standards and is built ESD safe. Voltage and resistance between tip and ground meet and exceed ANSI/ESD S20.20 and IPC J-STD-001F. Manufactured by JBC Soldering SL in Molins De Rei, Spain.