ESD extraction arm DN100, 3 joints, 2,130 mm, conductive PP, black, wall/ceiling mounting - Alsident 100-10585-3-6

Covering large capture areas from above: mounted on wall or ceiling, this arm reaches 2,130 mm, while 3 joints and two external gas springs make positioning easy. Tubes and joints in conductive black polypropylene dissipate charges, tested for ESD areas to IEC 61340-5-1 and for explosive atmospheres with marking Ex II 1 GD. System 100 is designed for 140 to 400 m³/h with a Ø100 mm tube.

Benefits

• Tested for ESD areas to IEC 61340-5-1 and for ESD/Ex areas to EN 80079-36:2016 and EN 80079-37:2016 (ATEX directive 2014/34/EU)
• Fixed earth cable for Ex areas plus a separate earth cable with 1 MΩ safety resistor for ESD areas included
• 2 external gas springs instead of an internal spring, so the long arm stays in any position
• Integrated damper that sits outside the airflow when open for maximum throughput
• Dismantled without tools for cleaning, maintenance-free polyethylene (PE) O-rings

Specifications

Applications

• ESD workstations in electronics manufacturing, for example soldering or bonding
• Ex areas in the chemical and pharmaceutical industry
• Laboratories handling solvent vapours in ATEX zones

Compatibility and scope of delivery

• Part of Alsident System 100. Arm, hood and bracket are ordered separately
• Matching hoods: 1-10024-6 (Ø200), 1-10036-6 (Ø350), 1-10035-6 (Ø385), 1-10050-6 (Ø500), 1-1004228-6 (420 x 280 mm)
• Wall bracket 2-100-203 (white), -050 (black), -22 (stainless steel AISI 316L), with reducer for Ø125 mm duct connection
• Ceiling mounting via base box 150 x 150 mm, length 500 to 2500 mm, top or side connection Ø125 mm
• Protective grid 5-18-6 against foreign objects being sucked in, available as accessory