ESD Safety Low Shoe GX 100 2.0 Ladies S1, mesh, width 10, blue/pink - Atlas 17300

A men shoe in size 37 is not a women shoe, and every operator notices that by the second shift. The GX 100 2.0 ESD is built on a dedicated female last, drains the wearer charge as an ESD model and protects the toes with a steel cap rated at 200 joules to EN ISO 20345:2012.

Why this model suits female feet

• ESD protection for the assembly. The ESD equipment places the shoe inside the protection concept of DIN EN 61340-5-1. The wearer charge flows through the dissipative sole into the floor before it can discharge onto a printed circuit board.
• Toe protection with a tested figure. Anatomically shaped steel toe cap, tested to EN ISO 20345:2012 at 200 joules impact energy and 15 kN compression. A reinforced toe guard extends service life during kneeling work.
• S1 in plain words. Closed heel area, antistatic construction and an energy absorbing heel. No penetration resistance and no water repellent upper, in exchange for very low weight and full breathability. For wet areas the penetration resistant sister model GX 105 2.0 is the right choice.
• SPORTY LIGHT sole with a female fit. The lamella profile delivers grip and reaches slip resistance SRC. The DYNAMIC LINE in the forefoot transfers forward energy and the CLOUDZONE in the heel absorbs impact.
• Foot climate across the whole shift. The mesh upper is air permeable, the aktiv-X functional lining regulates moisture, and the clima-stream concept of upper, lining and Klima Komfort insole balances heat and humidity inside the shoe.
• Insoles and cushioning. The MPU REBOUND SYSTEM combines a pressure relieving insole with a responsive MPU midsole. The model is approved for orthopaedic insole fitting under DGUV rule 112-191.

Technical data

Applications

Electronics manufacturing, PCB assembly and test benches, cleanroom gowning and grey areas, mechanical assembly, laboratory work, warehouse and order picking with long walking distances.

Standards and conformity

• EN ISO 20345, safety footwear for professional use, protection class S1
• Toe cap to EN ISO 20345:2012, tested at 200 joules impact energy and 15 kN compression
• Slip resistance SRC
• ESD equipment for workplaces to DIN EN 61340-5-1. EN ISO 20345 itself only verifies the antistatic range, the ESD proof belongs to the workplace concept.
• PPE Regulation (EU) 2016/425, risk category II
• Suitable for orthopaedic insole fitting under DGUV rule 112-191
• Manufacturer ATLAS-Schuhfabrik GmbH & Co. KG, Dortmund

Sizes and delivery

Available in EU sizes 35 to 43 in width 10. Supplied as one pair.