Additional plate 1.5 mm for longer lead cutting length for SUPERCUT/LN5L - Iteco 34021402

This additional plate of 1.5 mm for the SUPERCUT/LN5L sits between the 1 mm and 2 mm steps. It raises the cutting height from 3.2 mm to 4.7 mm and is used when long rows of components rest on spacers or insulating washers.

Benefits

• 1.5 mm material thickness, the intermediate dimension for the long 53 x 93 mm cutting area.
• Cutting height of 4.7 mm instead of the 3.2 mm standard condition of the SUPERCUT/LN5L.
• Compensates the height of spacers and insulating washers under long connectors.
• The guillotine cut with zero clearance between the plates stays free of burrs even when many leads are cut at once.
• Half of the 3 mm maximum additional thickness.

Technical data

Applications

Long connectors and terminal blocks with spacers, assemblies with an insulating underlay, and production that requires a lead length between the 1 mm and 2 mm steps.

Compatibility and scope of delivery

The plate belongs to the SUPERCUT/LN5L cutting machine (Iteco 7915.041L) and is fitted on its 3.2 mm stationary plate. For the SUPERCUT/LN5 model, order the plate of the same thickness, Iteco 34011417, instead. Scope of delivery: one additional plate of 1.5 mm, no further accessories. Made in Italy by Iteco.