i-CON PICO MK2 elektronisch geregelte Lötstation, 80W mit Zeit-Standby, 5-teiliges STARTER-SET - Ersa 0IC1305SET1

On a repair bench, time is lost twice over: waiting for heat-up and changing tips. The Ersa i-CON PICO MK2 is at working temperature after 9 seconds and supplies up to 80 W, with stepless control from 150 to 450 °C.

Features

• 9 second heat-up, so the station is ready right after switch-on and after every standby period.
• Up to 80 W in a slim iron, enough for ground planes and multilayer boards in service work.
• 150 to 450 °C control range, covering lead-free alloys as well as temperature sensitive parts.
• Tip N Turn bayonet lock, tips change by hand without a tool.
• Timed standby with adjustable shut-off delay, protecting the tip and cutting consumption during breaks.
• Calibration from the station, so tip temperature can be corrected without replacing the iron.
• Series 142 tips with ERSADUR plating, three shapes from 0.3 to 1.6 mm are included.

Technical data

Scope of delivery

Control station max. 80 W (0IC1335), i-Tool PICO MK2 80 W soldering iron (0135CDK), ERSADUR chisel tip 1.6 mm (0142CDLF16) and holder (0A60). The 5-piece starter set adds an ERSADUR pencil tip 0.3 mm (0142PDLF03), an ERSADUR chisel tip 1.0 mm (0142CDLF10), mini side cutters (GOES100), an ESD desoldering pump (GOELPA) and an ESD work mat (GOAMATSIL).

Applications

Repair, prototyping, training and service work on populated assemblies. The small footprint suits benches where free surface is scarce.

Compatibility

Series 142 soldering tips for the i-Tool PICO MK2. Replacement tips of this series are available separately.