ESD workstation leg Duo right, electric height adjustment 710-1210 mm, module depth 625 mm, crossbar 578 mm, 200 kg - Lista 90.807

This right-hand Duo leg completes the left one to form a load-bearing bench with 625 mm module depth. The crossbar is 578 mm deep, the electric adjustment ranges from 710 to 1210 mm and each leg is rated for 200 kg.

Benefits

• Electric height adjustment from 710 to 1210 mm: seated and standing work at the same station without conversion
• Load capacity 200 kg per leg for test set-ups, soldering stations and measuring equipment
• Crossbar depth 578 mm matched to the 625 mm module depth, same hole pattern as the Lista workbench leg
• Skids and levelling feet included to compensate for uneven floors
• Lista dissipative paint coating on all painted surfaces: charges are drained in a controlled way when the workstation system is earthed

Colours

This version is available in the following ESD colour, selected when you order:

• Anthracite grey RAL 7016

Use and combination

For height-adjustable workstations in EPA areas of electronics production, at test and repair stations and in the laboratory. A workbench is built from one left and one right Duo leg of the same module depth, completed with cross brace, worktop crossbars and an ESD worktop. Leg covers conceal the actuators, and finger guards are intended for workstations placed close together or flush.

A CPU holder and a keyboard drawer can be mounted under the worktop.

With the Duo castor set the bench becomes temporarily mobile when unloaded.

Notes

• Connection cable and control unit set are not included and must be ordered separately.
• Note left and right versions: this leg is the right-hand version.