Slotted screwdriver bit 4.0 x 0.5 mm, 44 mm length, 4 mm shank - Delvo DLB2223

The larger the slotted screw, the more torque ends up on the cutting edge. With a blade 4.0 mm wide and 0.5 mm thick, the DLB2223 is built for exactly that load and keeps the force in the slot instead of turning it into a damaged head.

Benefits

• The 0.5 mm blade is far stiffer in bending than the small sizes of the range, giving clean tightening right up to the clutch shut-off of the driver.
• The 4.0 mm edge engages across the full slot length, so the head stays usable after repeated releasing and setting.
• Half-round HR shank of ø 4 mm, used directly in Delvo drivers DLV7400A, DLV5700, DLV5800, DLV7000, DLV8000, DLV3300 and DLV7300 in BME form.
• Overall length of 44 mm stays handy, so the distance between holder and screw never becomes a lever.
• Heat-treated special alloy from continuous Nitto Kohki manufacturing, from raw material to the inspected bit.

Applications

Control cabinet building and terminal assembly, machine and device construction with larger slotted screws, and maintenance on plants where tight screws are opened on a regular basis.

Matching accessories

This size suits the ESD electric screwdriver DLV-7331-BME6 with the higher torque range of the 4 mm family. Drivers with a 1/4 inch holder take the bit through the ADA-HR4-D63 adapter, while the MAG-RING-6,0 ring magnet holds larger screws on the blade. The neighbouring sizes are DLB2222 and DLB2224.