ESD electric screwdriver lever start 0.15 - 0.4 Nm, 450 - 600 rpm - Delvo DLV-7420A BME6

On threads from 1.6 to 2.6 mm only a tenth of a newton metre separates tight from stripped. This screwdriver holds the preset torque between 0.15 and 0.40 Nm and weighs just 230 g, so the hundredth part of the shift is tightened like the first.

Benefits

• Fine torque range from 0.15 to 0.40 Nm for machine screws from 1.6 to 2.6 mm.
• Tool weight of 230 g and a compact body, which relieves hand and forearm in series work.
• Lever start releases the spindle only after the bit is seated, so it stays in the recess.
• Speed of 450 to 600 rpm, matched to small screws and soft materials.
• Bit holder for 4 mm half-round shanks, matching the Delvo DLB bit range.
• Dissipative design for workplaces handling electrostatic sensitive devices.

Applications

Board and device assembly, precision engineering, optics and medical technology as well as repair and test benches where small screws sit in sensitive assemblies.

Matching accessories

The screwdriver runs on the DLC1213A-GGB control unit with soft start and adjustable speed, and the DLW-9072 connecting cable is required for the link. The 4 mm holder takes bits of the DLB range, such as DLB2122, DLB2124 and DLB2126 with cross recess or DLB-2906IP-64 with Torx Plus. The BAL-0515 and BAL-1020 tool balancers carry the tool at the bench.

ESD design

Housing, grip area and bit holder conduct charges away in a controlled way instead of letting them build up on the tool. The screwdriver therefore suits workplaces inside an EPA according to IEC 61340-5-1.