ESD electric screwdriver lever start 0.3 - 1.2 Nm, 500 - 700 rpm, 4 mm bit - Delvo DLV-7331-BME6

Threads from 2.0 to 3.5 mm in housings and assemblies should end up equally tight on every part, without the plastic giving way. This screwdriver holds the preset torque between 0.3 and 1.2 Nm and shuts off through its clutch as soon as the value is reached.

Benefits

• Torque infinitely adjustable from 0.3 to 1.2 Nm, one tool for machine screws from 2.0 to 3.5 mm.
• Shut-off clutch delivers the same tightening on every screw and protects thread and plastic.
• Lever start releases the spindle only after the bit is seated, so it stays in the recess.
• Speed of 500 to 700 rpm, matched to mid-size screws.
• Bit holder for 4 mm half-round shanks, taking the Delvo DLB range without an adapter.
• Tool weight of 350 g at 35 W power consumption, in a dissipative design.

Applications

Electronics and device assembly, control cabinet and switchgear building, precision engineering as well as repair and test benches with screws up to 3.5 mm in sensitive assemblies.

Matching accessories

The screwdriver runs on the DLC1213A-GGB ESD control unit with soft start and adjustable speed. The 4 mm holder takes bits of the DLB range directly, such as DLB2122, DLB2124 and DLB2126 with cross recess or DLB-2906IP-64 with Torx Plus. The BAL-0515 and BAL-1020 tool balancers carry the weight of the tool at the bench.

ESD design

Housing, grip area and bit holder conduct charges away in a controlled way instead of letting them build up on the tool. The screwdriver therefore suits workplaces inside an EPA according to IEC 61340-5-1.