Torx screwdriver bit T08, 3.0 mm blade, 4 mm half-round shank, 44 mm - Delvo DLB2508

Housing covers and brackets are usually fastened with Torx T08, and the torque there is already noticeable. The 3.0 mm blade takes that load without the bit turning inside the screw.

Benefits

• 3.0 mm blade for Torx T08, sized for housing and bracket screws.
• Overall length of 44 mm, a short design with little deflection under load.
• Half-round 4 mm shank with a collar at 20 mm transmits torque without an intermediate holder.
• Special alloy with controlled heat treatment, prepared specifically for screwdriver bits.
• Fits the DLV7400A, DLV5700, DLV5800, DLV7000, DLV8000 and DLV3300 series.

Applications

Device and final assembly, housing covers, brackets and sheet metal fastenings with Torx T08, service and rework.

Matching accessories

On screwdrivers with a 1/4 inch holder the bit runs via the ADA-HR4-D63 adapter. The MAG-RING-4,7 and MAG-RING-6,0 ring magnets hold the screw on the bit until the thread catches. The same range also offers the Torx sizes DLB2503, DLB2504, DLB2505 and DLB2510. Matching screwdrivers with a 4 mm holder are, for example, DLV-7410-BME6, DLV-7420A BME6 and DLV-7331-BME6.