Torx screwdriver bit T04, 1.8 mm blade, 4 mm half-round shank, 44 mm - Delvo DLB2504

Only 0.1 mm of blade diameter separates T03 from T04, and that is exactly where most rounded-out screws come from. This bit is clearly marked as T04 with a 1.8 mm blade and therefore stays distinguishable from its neighbour at the bench.

Benefits

• 1.8 mm blade for Torx T04, clearly set apart from the neighbouring T03 size.
• Overall length of 44 mm, the short version of the range for tight installation positions.
• Half-round 4 mm shank with a collar at 20 mm for a defined seat in the H4 holder.
• Manufactured in house from raw material to finished blade, which keeps runout low.
• Special alloy with controlled heat treatment and close hardness testing.

Applications

Electronic assembly work, connectors and small housings, test and repair benches running mixed Torx sizes from T03 to T10.

Matching accessories

On screwdrivers with a 1/4 inch holder the bit runs via the ADA-HR4-D63 adapter. The MAG-RING-4,7 and MAG-RING-6,0 ring magnets hold the screw on the bit until the thread catches. The same range also offers the Torx sizes DLB2503, DLB2505, DLB2508 and DLB2510. Matching screwdrivers with a 4 mm holder are, for example, DLV-7410-BME6, DLV-7420A BME6 and DLV-7331-BME6.