ESD shaker box for screws 3.0 - 4.0 mm, 10 x 16 holes of 4.2 mm - Delvo DLW-3802

At a manual assembly bench, every screw that has to be turned over before it can be gripped costs time. This shaker box brings screws of 3.0 to 4.0 mm into the heads up position with a few shakes, so the vacuum or magnetic pickup of the electric screwdriver takes them in one move.

Benefits

• Screws rest head up, vacuum or magnetic pickup works without repositioning them by hand.
• Hole pattern of 10 x 16 with a hole diameter of 4.2 mm, matched to screws of 3.0 to 4.0 mm.
• Anti-electrostatic resin clearly reduces static build up, the screws stay loose in the tray instead of sticking to it.
• Less dust attaches to the tray, so the screws waiting at the bench stay clean.
• ESD compliant design for workplaces handling electrostatic sensitive devices.

Applications

Presentation of larger screws at assembly benches in device and machine building as well as in electrical engineering.

Matching accessories

Smaller screws are covered by the DLW-3602 shaker box for 2.0 to 2.6 mm and the DLW-3402 for 1.7 to 2.0 mm. The screws are picked up for instance with the DLV45S06P-AYK, DLV70A06P-ABK and DLV70A06L-ABK electric screwdrivers. Another way of presenting screws at the bench is the OM26M-OMM30 screw feeder.

ESD design

The anti-electrostatic resin dissipates charge instead of holding it. Screw presentation therefore stays part of an EPA according to IEC 61340-5-1, and the screws reach the assembly uncharged.