Soldering and rework station 2-channel 2 x 60 W SmartHeat with MFR-H1-SC2 handpiece - Oki MFR-2210

Anyone who solders, desolders and reworks at one bench needs two tools within reach and a supply that carries both at once. The Oki MFR-2210 is a two channel soldering and rework station with inductive SmartHeat technology, a dual simultaneous output of 2 x 60 W and an idle temperature stability of 1.1 °C.

Benefits

• Two ports for running two handpieces at the same time
• SmartHeat induction heating at 450 kHz for high heat demand work, no temperature setting required
• Output of 2 x 60 W at 130 W power consumption, wide range input 100-240 V
• Temperature stability of +/- 1.1 °C in still air, tip temperature per IPC J-STD-001
• Tip to ground resistance below 2 ohms and tip to ground potential below 2 mV with continuous ground detection
• Convertible to hot air desoldering with the MX-UK5 upgrade kit

Applications

Hand soldering and rework on boards with high thermal mass, board level repair, prototyping and small batch production. The second channel takes a further handpiece, for tweezer work or desoldering, without swapping plugs.

Compatibility and scope of delivery

The supplied MFR-H1-SC2 handpiece works with SxP soldering tips and RxP rework cartridges. Delivery includes the MFR-H1-SC2 handpiece, the MFR-PS2200 power supply with dual simultaneous output and the WS1 stand. For hot air desoldering the MX-UK5 upgrade kit is available.

Tip temperature accuracy meets or exceeds IPC J-STD-001. The grounding concept and the ESD figures of the station are designed for use in EPA areas to IEC 61340-5-1.