1-channel soldering and desoldering station 60 W with MFR-H1-SC2 handpiece - Oki MFR-1110
- This Item: €423.69
- 1-channel soldering and desoldering station 60 W with MFR-H2-ST2 handpiece - Oki MFR-1120 €378.59
- Desoldering station 2-channel 60 W with internal pump 0.7 bar - Oki MFR-1350 €758.17
Single output soldering and desoldering station for production, rework and repair at one workplace. The MFR-PS1100 power unit gives 60 watt to the MFR-H1-SC2 handpiece, which accepts SxP soldering cartridges and RxP rework cartridges. At 90 mm wide it takes little bench space.
Benefits
- Very versatile, the MFR-1100 platform runs a choice of four handpieces
- SmartHeat technology feeds heat back where the joint draws it, with no calibration
- Every handpiece has an extensive range of cartridges or tips
- Ergonomically shaped handpiece and WS1 stand with temperature lowering included
- Can be combined and locked with the MFR-2200 series when a second channel is needed
Technical data
| Item number | WL24472 |
| Model | MFR-1110 |
| Manufacturer | Oki |
| Manufacturer item number | MFR-1110 |
| Product series | MFR series |
| Station type | Soldering station, desoldering station |
| Dimensions (LxWxH) | 200 mm x 90 mm x 152.5 mm |
| Voltage | 100-240 V |
| Frequency | 50/60 Hz |
| Power consumption | 65 W |
| Output power supply unit | 60 watt |
| Output frequency | 450 kHz |
| Heating method | Induction, SmartHeat |
| Included handpiece | MFR-H1-SC2 |
| Suitable tips | SxP soldering cartridges, RxP rework cartridges |
| Tip to ground resistance | Less than 2 ohm |
| Temperature stability | +/- 1.1 °C |
| Ambient operating temperature | 10-40 °C |
| Cable length | 1.83 m |
| Weight of power unit | 2.3 kg |
| Certification | cTUVus, CE |
| Order unit | Piece |
| Scope of supply | MFR-PS1100 single output power supply, MFR-H1-SC2 soldering cartridge handpiece, WS1 stand with temperature lowering |
Applications
Hand soldering in production and prototype shops, rework and repair on populated boards, SMD service in test departments. Tip temperature accuracy meets the requirements of IPC J-STD-001.
Compatibility and scope of delivery
The MFR-PS1100 power unit accepts MFR series handpieces including the MFR-H2-ST2 and the MFR-H4-TW tweezers. Delivery covers the power unit, the MFR-H1-SC2 handpiece and the WS1 stand, cartridges are ordered separately.
Tip to ground resistance below 2 ohm and permanent ground detection make the station suitable for ESD protected areas to IEC 61340-5-1.
| Manufacturer Nr. | MFR-1110 |
|---|---|
| Manufacturer | Oki |
| Weight | 0.100000 |
| GPSR manufacturer information | OK International Ltd Eagle Close, Chandlers Ford GB-SO53 4NF Hampshire www.metcal.com |
| Article authenticity | Original product |
| Condition of article | New |
| Power | 60 W |
| Position sensing | No |
