2-channel soldering and rework station 2x60 W with MFR-H4-TW tweezers - Oki MFR-2240

Dual output soldering and rework station for workplaces that switch between removing SMD components and normal hand soldering without swapping tools. The set contains the MFR-PS2200 power unit with two simultaneously active outputs plus the MFR-H4-TW soldering tweezers and the MFR-WSPT stand. The second channel stays free for any further MFR series handpiece.

Benefits

• Two ports that can be operated at the same time, so two handpieces stay ready without replugging
• SmartHeat induction heating with 60 watt output per channel for high heat demand work such as ground planes and multilayer boards
• Temperature stability of +/- 1.1 °C without calibration because the set point is stored in the cartridge
• MFR-H4-TW tweezers grip chips, MELF and small SO packages from both sides and lift them in one move
• Wide range supply of 100-240 V and 50/60 Hz for use at any site

Applications

Repair and rework on populated boards, replacement of passive SMD parts, prototyping, small batch production and field service in electronics manufacturing. The free second channel suits an MFR-H1-SC2 soldering iron or a desoldering handpiece.

Compatibility and scope of delivery

The MFR-PS2200 power unit drives every handpiece of the MFR series. The supplied MFR-H4-TW tweezers take TxP tweezer tips. Delivery covers the power unit, the tweezers and the MFR-WSPT stand, tips are ordered separately.

Tip to ground resistance below 2 ohm and permanent ground detection make the station suitable for ESD protected areas to IEC 61340-5-1.