Solder fume extraction bench unit single user, 85 m3/h, plenum or arm - Oki BVX-103

At manual soldering benches the fume is generated at a single point and must be captured right at the joint. The Oki BVX-103 is a PRE-GAS volume extraction system for one workplace that needs no external ducting or compressor and runs directly on the workbench.

Benefits

• Single-place extraction with 85 m3/h air flow, immediate capture of fume, particles and vapours
• Innovative adapter converts the 300 mm wide plenum into an extraction arm
• Portable and low noise, fits on any table top or under the bench
• No external ducts and no compressor required
• Two filtration configurations for heavy soldering with light dust or for light organic solvents and adhesive applications
• Two-colour LED indicates when filters are blocked and need replacing

Technical data

Applications

Hand soldering benches in production, repair and laboratories, assembly rework, bonding and work with light organic solvents. Suitable wherever a central extraction system is not economical or not structurally possible.

Compatibility and scope of delivery

Supplied with the unit, a filter set, the BVX-ADT adapter for converting from plenum to arm and the 760 mm BVX extraction arm. The replacement filter is the FG-BVX double gas filter, which is also used in the BVX-101.