Soldering and desoldering station 2-channel 60 W with integrated pump - Oki MFR-1351
- This Item: €914.59
- Desoldering station 1-channel 60 W with MFR-H5-DS handpiece - Oki MFR-1150 €707.36
- Soldering and desoldering station 1-channel 60 W with iron for SSC cartridges - Oki MFR-1160 €392.54
A rework bench that has to both solder and desolder normally needs two units side by side. The MFR-1351 combines the two in one station with two switchable channels, an internal 0.7 bar pump and 60 W SmartHeat induction heating.
Benefits
- Two switchable channels run the desoldering handpiece and the cartridge soldering handpiece from the same supply
- Integrated vacuum pump with 0.7 bar suction, no external compressed air needed
- SmartHeat technology regulates temperature in the cartridge, stability +/- 1.1 °C
- Large solder collection chamber with quick-change fitting for short downtime
- Tip to ground resistance below 2 Ohm, suitable for ESD protected workstations
Technical data
| Item number | WL27221 |
| Model | MFR-1351 |
| Manufacturer | OKI |
| Manufacturer item number | MFR-1351 |
| Station type | desoldering station, soldering station |
| Product series | MFR series |
| Voltage | 100-240 V |
| Frequency | 450 KHz |
| Power consumption | 110 W |
| Output power supply unit | 60 Watt |
| Vacuum | 0.7 bar |
| Temperature stability | +/- 1.1 °C |
| Tip to ground resistance | < 2 Ohm |
| Ambient operating temperature | 10-40 °C |
| Dimensions (LxWxH) | 200 mm x 170 mm x 152.5 mm |
| Cable length | 1.22 m |
| Included handpieces | MFR-H5-DS, MFR-H1-SC2 |
| Suitable tips | SxP soldering tips, RxP rework cartridges, DxP desoldering tips |
| Order unit | piece |
Applications
Rework and repair of populated boards, desoldering of THT components and connectors and the subsequent resoldering in prototyping and small-batch production.
Compatibility and scope of delivery
Takes SxP soldering tips, RxP rework cartridges and DxP desoldering tips of the MFR series. Scope of delivery: MFR-PS1300 dual output power supply with internal pump, MFR-H5-DS desoldering handpiece with selectable grip, MFR-H1-SC2 cartridge soldering handpiece with cable, MFR-WSDSU universal stand for the desoldering handpiece and WS1 universal stand for the soldering handpiece.
The tip to ground resistance below 2 Ohm supports use at EPA workstations in line with IEC 61340-5-1.
| Manufacturer Nr. | MFR-1351 |
|---|---|
| Manufacturer | Oki |
| Weight | 0.100000 |
| GPSR manufacturer information | OK International Ltd Eagle Close, Chandlers Ford GB-SO53 4NF Hampshire www.metcal.com |
| Article authenticity | Original product |
| Condition of article | New |
| Power | 60 W |
| Position sensing | No |
