Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Two-channel desoldering station with built-in vacuum pump (0.7 bar) and 60 W SmartHeat induction heating. Temperature is set by the cartridge and stays within +/- 1.1 °C, so through-hole parts come out without lifting pads. Supplied with the MFR-H5-DS desoldering handpiece and a stand.
Desoldering station 2-channel 60 W with internal pump 0.7 bar - Oki MFR-1350
OKI
Original product
Net price (excl. VAT)
€758.17
Item
WL26975
Manufacturer no.
MFR-1350
Zertifiziert nach
ESD · IEC 61340-5-1
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.MFR-1350
ConditionNew
Article
WL26975
Frequently Bought Together
-
This Item:
€758.17
-
Desoldering station 1-channel 60 W with MFR-H5-DS handpiece - Oki MFR-1150
€707.36
-
Soldering and desoldering station 1-channel 60 W with iron for SSC cartridges - Oki MFR-1160
€392.54
Total price
Desoldering through-hole parts from multilayer boards usually fails because of weak vacuum or a tip that loses temperature. The MFR-1350 combines an internal pump with 0.7 bar suction and inductive SmartHeat heating rated at 60 W output.
Benefits
- Internal vacuum pump with 0.7 bar suction, no external compressed air supply required
- SmartHeat technology regulates temperature in the tip itself, stability +/- 1.1 °C
- Two switchable channels allow a second handpiece alongside the desoldering iron
- Large solder collection chamber with quick-change fitting for short downtime
- Tip to ground resistance below 2 Ohm, suitable for ESD protected workstations
Technical data
| Item number | WL26975 |
| Model | MFR-1350 |
| Manufacturer | OKI |
| Manufacturer item number | MFR-1350 |
| Station type | desoldering station |
| Product series | MFR series |
| Voltage | 100-240 V |
| Frequency | 450 KHz |
| Power consumption | 110 W |
| Output power supply unit | 60 Watt |
| Vacuum | 0.7 bar |
| Temperature stability | +/- 1.1 °C |
| Tip to ground resistance | < 2 Ohm |
| Ambient operating temperature | 10-40 °C |
| Dimensions (LxWxH) | 200 mm x 170 mm x 152.5 mm |
| Cable length | 1.22 m |
| Included handpiece | MFR-H5-DS |
| Suitable tips | DxP desoldering tips |
| Order unit | piece |
Applications
Desoldering of THT components, connectors and high thermal mass parts in repair, rework and small-batch production, including multilayer boards with ground planes.
Compatibility and scope of delivery
Takes DxP desoldering tips of the MFR series. The second channel accepts further MFR handpieces. Scope of delivery: MFR-PS1300 power supply, MFR-H5-DS desoldering tool and MFR-WSDSU stand.
The tip to ground resistance below 2 Ohm supports use at EPA workstations in line with IEC 61340-5-1.
| Certification | IEC 61340-5-1 |
|---|---|
| Manufacturer Nr. | MFR-1350 |
| Manufacturer | Oki |
| Weight | 0.100000 |
| GPSR manufacturer information | OK International Ltd Eagle Close, Chandlers Ford GB-SO53 4NF Hampshire www.metcal.com |
| Article authenticity | Original product |
| Condition of article | New |
| Power | 60 W |
| Position sensing | No |
Customers Who Bought This Item Also Bought
