Insulation stripper VDE 1000 V with opening spring and tether attachment point, 160 mm - Knipex 11 06 160 T

In a live distribution board and up a ladder the stripping tool must neither conduct current nor fall. The stripping pliers 11 06 160 T is tested to IEC 60900 for 1000 V, carries an integrated insulated attachment point for a tool tether and strips conductors up to 10 mm².

Benefits

• Insulated multi-component sleeves, VDE tested to DIN EN 60900 and IEC 60900 for work up to 1000 V.
• Integrated insulated tether attachment point, so the tool stays secured when working at height.
• For single, multiple and fine stranded conductors with plastic or rubber insulation, maximum Ø 5.0 mm or 10 mm² conductor cross-section, equal to AWG 8.
• Easy adjustment to the required solid or stranded wire diameter with knurled screw and lock nut, the setting stays put during work.
• Opening spring returns the tool to its starting position after every stroke.
• Chrome-plated pliers with chrome-plated head, dimensions 160 x 100 x 27 mm at 180 g.

Areas of use

Electrical installation and maintenance on systems up to 1000 V, work at height on ladders, platforms and scaffolds, and service work in control cabinets where a dropped tool would endanger people or components.

Standards and conformity

The pliers meet DIN EN 60900 and IEC 60900 for insulated tools up to 1000 V. According to the manufacturer they contain no substances of very high concern under REACH, the RoHS directive does not apply.